Dell Networking Z9500, Справочник по командам

Страница: 974 / 1905

• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For the Management interface on the stack-unit, enter
the keyword
ManagementEthernet
then the slot/port
information. The slot range is from 0 to 1. The port range
is 0.
• For a port channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 512.
• For a Null interface, enter the keyword null then the Null
interface number.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
• For a stack-unit interface, enter the keyword
stack-
unit
then the stack unit number.
• For a tunnel interface, enter the keyword
tunnel
then
the tunnel interface number. The range is from 1 to
16383.
brief (OPTIONAL) Enter the keyword
brief
to view a brief
summary of the interfaces and whether an IP address is
assigned.
configured (OPTIONAL) Enter the keyword
configured
to display the
physical interfaces with non-default configurations only.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.1.1.2 Supported on the E-Series ExaScale E600i.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
974
IPv4 Routing