Dell Networking Z9500, Справочник по командам

Страница: 435 / 1905

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
neighbor timers
Set keepalive and hold time timers for a BGP neighbor or a peer group.
Z9500
Syntax
neighbor { ip-address | peer-group-name } timers keepalive
holdtime
To return to the default values, use the
no neighbor { ip-address | peer-
group-name } timers
command.
Parameters
ip-address Enter the IP address of the peer router in dotted decimal
format.
peer-group-
name Enter the name of the peer group to set the timers for all
routers within the peer group.
keepalive Enter a number for the time interval, in seconds, between
keepalive messages sent to the neighbor routers. The range
is from 1 to 65535. The default is
60 seconds .
holdtime Enter a number for the time interval, in seconds, between
the last keepalive message and declaring the router dead.
The range is from 3 to 65535. The default is
180 seconds .
Defaults
• keepalive = 60 seconds
• holdtime = 180 seconds
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol
435