Dell Networking Z9500, Справочник по командам

Страница: 394 / 1905

Version Description
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
debug ip bgp
Display all information on BGP, including BGP events, keepalives, notifications, and updates.
Z9500
Syntax
debug ip bgp [ vrf vrf-name | A.B.C.D | X:X:X:X::X | peer-group
peer-group-name ] [in | out]
To disable all BGP debugging, use the
no debug ip bgp
command.
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to
debug BGP information corresponding to that VRF.
NOTE: Use this attribute to debug BGP protocol
operations corresponding to either a default or non-
default VRF.
A.B.C.D Enter the IPv4 address of the neighbor in dotted decimal
format.
X:X:X:X::X (OPTIONAL) Enter an IPv6 address.
peer-group
peer-group-
name
Enter the keywords
peer-group
then the name of the peer
group to debug.
in (OPTIONAL) Enter the keyword
in
to view only information
on inbound BGP routes.
out (OPTIONAL) Enter the keyword
out
to view only information
on outbound BGP routes.
A.B.C.D Enter the IP address of peer in the A.B.C.D format.
X:X:X:X::X Enter the IPv6 IP address of peer in the X:X:X:X::X format.
dampening Enter the keyword
dampening
to view BGP dampening.
events Enter the keyword
events
to view BGP protocol events.
ipv4 Enter the ipv4 IP address to view the IPV4 route information.
394
Border Gateway Protocol