manualshive.com logo in svg

Dell Networking Z9500, Справочник по командам

Поделиться
Скачать
Dell Networking Z9500 Скачать руководство пользователя страница 1354

Version

Description

9.7(0.0)

Added support for VRF.

9.2(1.0)

Introduced on the Z9500.

9.1.(0.0)

Introduced on the S4810 and Z9000.

8.3.19.0

Introduced on the S4820T.

7.8.1.0

Added support for the C-Series.

7.4.1.0

Introduced on the E-Series.

maximum-paths

Enable the software to forward packets over multiple paths.

Z9500

Syntax

maximum-paths 

number

To disable packet forwarding over multiple paths, use the 

no maximum-paths 

command.

Parameters

number

Specify the number of paths. The range is from 1 to 64. The 
default is 

8

 paths.

Defaults

8

Command 
Modes

ROUTER OSPF

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Added support for Multi-Process OSPF.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

6.1.1.1

Introduced on the E-Series.

1354

Open Shortest Path First (OSPFv2 and OSPFv3)

Содержание Networking Z9500


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды