Dell Networking Z9500, Справочник по командам

Страница: 610 / 1905

Usage
Information Specify a linecard number on the Master switch in a stack.
NOTE:
show dcb
command without options displays DCB buffer details for
all linecards, SFMs, and for all port-pipes.
Example
Dell#sh dcb linecard 2 port-set 0
DCB Status: Enabled, PFC Queue Count: 2
linecard Total Buffer PFC Total Buffer PFC Shared Buffer PFC
Available Buffer
PP (KB) (KB)
(KB) (KB)
---------------------------------------------------------------
---------------------------------
2 0 11210 7488
496 4992
Dell#
show interface pfc
Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.
Syntax
show interface port-type slot/port pfc { summary | detail }
Parameters
port-type slot/
port pfc Enter the port-type slot and port PFC information.
{summary |
detail} Enter the keyword
summary
for a summary list of results or
enter the keyword
detail
for a full list of results.
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Usage
Information
To clear the PFC TLV counters, use the
clear pfc counters interface
port-type slot/port
command.
The following describes the
show interface pfc summary
command shown in
the following example.
Field Description
Interface Interface type with linecard and port number.
610
Data Center Bridging (DCB)