Dell Networking Z9500, Справочник по командам

Страница: 1356 / 1905

On configuring suppression using the passive-interface command, the state of the
OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor
changes to DOWN after the dead-timer expires.
redistribute
Redistribute into OSPFv3.
Z9500
Syntax
redistribute {bgp as number }{connected | static}[metric metric-
value | metric-type type-value ] [route-map map-name ] [tag tag-
value ]
To disable redistribution, use the
no redistribute {connected | static}
command.
Parameters
bgp as number
Enter the keyword
bgp
then the autonomous system
number.
The range is from 1 to 65535.
connected
Enter the keyword
connected
to redistribute routes from
physically connected interfaces.
static
Enter the keyword
static
to redistribute manually
configured routes.
metric metric-
value
Enter the keyword
metric
then the metric value.
The range is from 0 to 16777214.
The default is 20 .
metric-type
type-value
(OPTIONAL) Enter the keywords
metric-type
then the
OSPFv3 link state type of 1 or 2 for default routes. The values
are:
• 1 for a type 1 external route
• 2 for a type 2 external route
The default is 2 .
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of an established route map. If the route map is not
configured, the default is
deny (to drop all routes).
1356
Open Shortest Path First (OSPFv2 and OSPFv3)