Dell Networking Z9500, Справочник по командам

Страница: 1145 / 1905

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
Usage
Information If you configure
mac-learn-limit
and the sticky MAC feature is enabled,
dynamically learned MAC addresses are converted to sticky for that port. Any new
MAC address that is learned also becomes sticky for that port.
Related
Commands show mac learning-limit — displays the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
Z9500
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the
no mac learning-limit station-move-
violation
command, then the configured keyword.
Parameters
log Enter the keyword
log
to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword
shutdown
to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending Enter the keywords
shutdown-offending
to shut down
the offending interface and generate a syslog message.
shutdown-
original Enter the keywords
shutdown-original
to shut down the
original interface and generate a syslog message.
Defaults none
Command
Modes INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
Layer 2
1145