Dell Networking Z9500, Справочник по командам

Страница: 859 / 1905

pps 0
Output underruns: 0 0
pps 0
Output throttles: 0 0
pps 0
m - Change mode c - Clear
screen
l - Page up a - Page down
T - Increase refresh interval t - Decrease
refresh interval
q - Quit
mtu
Set the link maximum transmission unit (MTU) (frame size) for an Ethernet interface.
Z9500
Syntax
mtu value
To return to the default MTU value, use the
no mtu
command.
Parameters
value Enter a maximum frame size in bytes. The range is from 592
to 9216. The default is
9216 .
Defaults 9216
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Usage
Information
If the packet includes a Layer 2 header, the difference between the link MTU and IP
MTU (
ip mtu
command) must be enough bytes to include the Layer 2 header.
Interfaces
859