Dell Networking Z9500, Справочник по командам

Страница: 662 / 1905

If the default buffer-profile is active, Dell Networking OS displays an error message
instructing you to remove the default configuration using the
no buffer-
profile global
command.
Reload the system for the global buffer-profile to take effect.
Hardware Commands
The hardware commands supported on the switch allow you to display information from a hardware
sub-component or ASIC.
clear control-traffic
Clear control-traffic statistics from a Z9500 CPU.
Z9500
Syntax
clear control—traffic {all | cp—switch | linecard slot-id
portset port-pipe } counters
Parameters
cp-switch Enter the keyword
cp-switch
to clear the counters for
control traffic on the control plane.
linecard slot-id
portset port-
pipe
Enter the slot ID and port pipe to clear the counters for
control traffic on a specified Z9500 line card and port set.
The range of Z9500 slot IDs is from 0 to 2. The range of
port-pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line
cards 1 and 2.
all Enter the keyword
all
to clear control-traffic statistics on
the control plane and all line cards.
Defaults None.
Command
Modes EXEC Privilege
Example
Dell# clear control-traffic cp-switch counters
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
662
Debugging and Diagnostics