Dell Networking Z9500, Справочник по командам

Страница: 101 / 1905

Usage
Information This command enables (and disables) the collection of CPU traffic statistics from
the time this command is executed (not from system boot). However, excessive
traffic a CPU receives automatically triggers (turn on) the collection of CPU traffic
statics.
The following message is an indication that collection of CPU traffic is
automatically turned on. To view the traffic statistics, use the
show cpu-
traffic-stats
command.
If the CPU receives excessive traffic, traffic is rate controlled.
NOTE: This command must be enabled before the
show cpu-traffic-
stats
command displays traffic statistics. Dell Networking recommends
disabling debugging (
no debug cpu-traffic-stats
) after troubleshooting
is complete.
Related
Commands show cpu-traffic-stats — displays the cpu traffic statistics.
debug ftpserver
View transactions during an FTP session when a user is logged into the FTP server.
Z9500
Syntax
debug ftpserver
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Control and Monitoring
101