Dell Networking Z9500, Справочник по командам

Страница: 1668 / 1905

Version Description
6.1.1.0 Introduced on the E-Series.
Usage
Information This command enables the SSH server and begins listening on a port. If a port is
not specified, listening is on SSH default port 22.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related
Commands show ip ssh — displays the ssh information.
ip ssh source-interface
Specifies an interface’s IP address as the source IP address for an outgoing SSH connections.
Z9500
Syntax ip ssh source-interface interface
To delete a source interface, use the
no ip ssh source-interface
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For Loopback interfaces, enter the keyword
loopback
then a number from zero (0) to 16838.
• For the Null interface, enter the keywords
null 0
.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
1668
Security