Dell Networking Z9500, Справочник по командам

Страница: 318 / 1905

permit (OPTIONAL) Enter the keyword
permit
to set the route map
default as permit. If you do not specify a keyword, the default
is
permit
.
deny (OPTIONAL) Enter the keyword
deny
to set the route map
default as deny.
sequence-
number (OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
prompted for a sequence number if there are multiple
instances of the route map. The range is from 1 to 65535.
Defaults Not configured.
If you do not define a keyword (
permit
or
deny
) for the route map, the
permit
action is the default.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information Use caution when you delete route maps because if you do not specify a sequence
number, all route maps with the same
map-name
are deleted when you use the
no
route-map map-name
command.
Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related
Commands show config — displays the current configuration.
318
Access Control Lists (ACL)