Dell Networking Z9500, Справочник по командам

Страница: 367 / 1905

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information If you enable this command, use the
clear ip bgp *
command to recompute
the best path.
bgp bestpath as-path multipath-relax
Include prefixes received from different AS paths during multipath calculation.
Z9500
Syntax
bgp bestpath as-path multipath-relax
To return to the default BGP routing process, use the
no bgp bestpath as-
path multipath-relax
command.
Defaults Disabled
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information The
bestpath router bgp configuration mode
command changes the
default bestpath selection algorithm. The
multipath-relax
option allows load-
sharing across providers with different (but equal-length) autonomous system
paths. Without this option, ECMP expects the AS paths to be identical for load-
sharing.
Border Gateway Protocol
367