Dell Networking Z9500, Справочник по командам

Страница: 1224 / 1905

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
6.2.1.1 Introduced
ip msdp peer
Configure an MSDP peer.
Z9500
Syntax
ip msdp peer peer address [connect-source] [description] [sa-
limit number ]
To remove the MSDP peer, use the
no ip msdp peer peer address
[connect-source interface] [description name ] [sa-limit number ]
command.
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
connect-
source
interface
Enter the keywords
connect-source
then one of the
interfaces and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 512.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
description
name (OPTIONAL) Enter the keyword description then a
description name (maximum 80 characters) to designate a
description for the MSDP peer.
sa-limit
number
(OPTIONAL) Enter the maximum number of SA entries in SA-
cache. The range is from 1 to 100000. .
Defaults As described in the Parameters section.
1224
Multicast Source Discovery Protocol (MSDP)