Dell Networking Z9500, Справочник по командам

Страница: 1138 / 1905

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
vlan vlan-id Enter the keyword
vlan
then a VLAN ID number from 1 to
4094.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Added support for sticky MAC addresses.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
mac-address-table aging-time
Specify an aging time for MAC addresses to remove from the MAC address table.
Z9500
Syntax
mac-address-table aging-time seconds
Parameters
seconds Enter either zero (0) or a number as the number of seconds
before MAC addresses are relearned. To disable aging of the
MAC address table, enter
0
. The range is from 10 to
1000000. The default is 1800 seconds .
Defaults 1800 seconds
Command
Modes CONFIGURATION
1138
Layer 2