Santerno Sinus M, User Manual

Page: 67 / 219

7-17
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adj.
during
run
H86 [2
nd
motor
reverse
torque boost]
0 ~ 15 [%] This parameter actives when the
selected terminal is ON after I17-I24 is
set to 12 {2
nd
motor select}.
5 X
H87 [2
nd
motor
stall
prevention
level]
30~150 [%] 150 X
H88 [2
nd
motor
Electronic
thermal level
for 1 min]
50~200 [%] 150 O
H89 [2
nd
motor
Electronic
thermal level
for
continuous]
100 O
H90 [2
nd
motor
rated
current]
0.1~50 [A] 26.3 X
H91
1)
[Parameter
read]
0 ~ 1 Copy the parameters from inverter and
save them into remote keypad.
0 X
H92
1)
[Parameter
write]
0 ~ 1 Copy the parameters from remote
keypad and save them into inverter.
0 X
H93 [Parameter
initialize]
0 ~ 5 This parameter is used to initialize
parameters back to the factory default
value.
0 X
0 -
1 All parameter groups are initialized
to factory default value.
2 Only Drive group is initialized.
3 Only Function group 1 is initialized.
4 Only Function group 2 is initialized.
5 Only I/O group is initialized.
H94 [Password
register]
0 ~ FFFF Password for H95-[Parameter lock]. Set
as Hex value.
0 O
H95 [Parameter
lock]
0 ~ FFFF This parameter is able to lock or unlock
parameters by typing password
registered in H94.
0 O
UL (Unlock) Parameter change enable
L (Lock)
Parameter change disable
1)
: H91,H92 parameters are displayed when the Remote option is installed.