Santerno Sinus M, User Manual

Page: 39 / 219

5-5
5.4 How to change the codes in a group

Code change in Drive group
Drive group
1
-. In the 1
st
code in Drive group “0.00”,
press the Up (

) key once.
2
-. The 2
nd
code in Drive group “ACC” is
displayed.
-. Press the Up (

) key once.
3
-. The 3
rd
code “dEC” in Drive group is
displayed.
-. Keep pressing the Up (

) key until the
last code appears.
4
-. The last code in Drive group “drC” is
displayed.
-. Press the Up (

) key again.
5 -. Return to the first code of Drive group.
♣
Use Down (

) key for the opposite order.

Code jump
When moving from the “F0” to the “F15” directly
FU group 1
1 -. Press the Ent (

) key in “F0”.
2
-. 1 (the code number of F1) is displayed.
Use the Up (

) key to set to 5.
3
-. “ 0 5” is displayed by pressing the Left
(

) key once to move the cursor to the
left. The numeral having a cursor is
displayed brighter. In this case,
0
is active.
-. Use the Up (

) key to set to 1.
4
-.
1
5 is set.
-. Press the Ent (

) key once.
5 -. Moving to F15 has been complete.
♣ Function group 2 and I/O group are settable with the same setting.