Santerno Sinus M, User Manual, Page: 84 / 219

9-6

Frequency setting via RS 485 communication
Group Code Parameter Name Setting Range Initial Unit
Drive
group
0.0 [Frequency Command] - 0 ~400 0.00 Hz
Frq [Frequency Mode] 7
0 ~ 8 0

Select 7 in Frq code of Drive group.

Related codes: I59, I60, I61

Refer to Chapter 13. RS485 communication.

Frequency setting via Digital Volume (up-down)
Group Code Parameter Name Setting Range Initial Unit
Drive
group
0.0 [Frequency Command] - 0 ~400 0.00 Hz
Frq [Frequency Mode] 8
0 ~ 8 0

Select 8 in Frq code of Drive group.

Related codes: I17 ~ 24.

Among the multifunction inputs (P1 ~ P8), select two terminals to be used for up-down.

Refer to Chapter 7, I/O 2 Group.

Analog Hold
Group Code Parameter Name Setting Range Initial Unit
Drive
group
Frq [Frequency Mode] 2 ~ 7 0 ~ 7 0
I/O group I17
[Multi-function input terminal
P1 define]
-
0 ~ 29
0
~ ~
I24
[Multi-function input
terminal P8 define]
23 7

It is available when Frq code setting is 2 ~ 7.

Select one terminal to be used for Analog Hold command among Multi-function input
terminal (P1 ~ P8).

When P8 terminal is selected,
Frequency
P8
Run command
Set freq.