Santerno Sinus M, User Manual

Page: 68 / 219

7-18
7.4 I/O group 2
LED
display Parameter name
Min/Max
range
Description
Factory
defaults
Adj.
during
run
I0 [Jump code] 0 ~ 81 Sets the code number to jump. 1 O
I1 [Filter time
constant for NV
input]
0 ~ 9999 Adjusts the responsiveness of NV input
(–10V~0V).
10 O
I2 [NV input Min
voltage]
0 ~ –10
[V]
Sets the minimum negative input
voltage of V1 (–10V~0V) input.
0.00 O
I3 [Frequency
corresponding to
I2]
0 ~ 400
[Hz]
Sets the inverter output minimum
frequency at minimum negative voltage
of I2.
0.00 O
I4 [NV input Max
voltage]
0 ~ –10
[V]
Sets the maximum negative input
voltage of the V1 input (–10V~0V).
10.0 O
I5 [Frequency
corresponding to
I4]
0 ~ 400
[Hz]
Sets the inverter output maximum
frequency at maximum negative
voltage of I4.
50.00 O
I6 [Filter time
constant for V1
input]
0 ~ 9999 Adjusts the responsiveness of V1 input
(0 ~ +10V).
10 O
I7 [V1 input Min
voltage]
0 ~ 10
[V]
Sets the minimum positive voltage of
the V1 input.
0 O
I8 [Frequency
corresponding to
I7]
0 ~ 400
[Hz]
Sets the inverter output minimum
frequency at minimum positive voltage
of I7.
0.00 O
I9 [V1 input Max
voltage]
0 ~ 10
[V]
Sets the maximum positive voltage of
the V1 input.
10 O
I10 [Frequency
corresponding to
I9]
0 ~ 400
[Hz]
Sets the inverter output maximum
frequency at maximum positive voltage
of I9.
50.00 O
I11 [Filter time
constant for I
input]
0 ~ 9999 Sets the input section’s internal filter
constant for I input.
10 O
I12 [I input Min
current]
0 ~ 20
[mA]
Sets the minimum current of I input. 4.00 O
I13 [Frequency
corresponding to
I12]
0 ~ 400
[Hz]
Sets the inverter output minimum
frequency at minimum current of I
input.
0.00 O
I14 [I input Max
current]
0 ~ 20
[mA]
Sets the Maximum current of I input. 20.00 O
I15 [Frequency
corresponding to
I14]
0 ~ 400
[Hz]
Sets the inverter output maximum
frequency at maximum current of I
input.
50.00 O
I16 [Criteria for
Analog Input
Signal loss]
0 ~ 2 0: Disabled
1: activated below half of set value.
2: activated below set value.
0 O