Santerno Sinus M, User Manual

Page: 65 / 219

7-15
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adj.
durin
g run
H61
Sleep delay
time
0~999 (sec) Sleep Mode delay time 60 sec X
H62
Sleep
frequency
0~400Hz Sleep Frequency 0.0Hz O
H63
Wake-up
level
0~50[%] Wake Up level 2[%] O
H64 [KEB select] 0~1 Sets the KEB 0 X
H65 [KEB action
start level]
110~140[%] Sets KEB action start level according to
level.
125.0 X
H66 [KEB action
stop level]
110~145[%] Sets KEB action stop level according to
level.
130.0 X
H67 [KEB action
gain]
1~20000 Sets KEB action gain. 1000 X
H69
Accel/Decel
Change
Frequency
0 ~ 400Hz Accel/decel change frequency 0Hz X
H70 [Frequency
Ref. for
Accel/Decel]
0 ~ 1 0 Based on Max freq (F21) 0 X
1 Based on Delta freq.
H71 [Accel/Decel
time scale]
0 ~ 2 0 Settable unit: 0.01 second. 1 O
1 Settable unit: 0.1 second.
2 Settable unit: 1 second.
H72
[Power on
display]
0 ~ 17
This parameter selects the parameter to be
displayed on the keypad when the input
power is first applied.
0 O
0 Frequency command
1 Accel time
2 Decel time
3 Drive mode
4 Frequency mode
5 Multi-step frequency 1 (St1)
6 Multi-step frequency 2 (St2)
7 Multi-step frequency 3 (St3)
8 Output current (Cur)
9 Motor rpm (rPM)
10 Inverter DC link voltage (dCL)
11 User display select (vOL)
12 Fault display 1(nOn)
13 Operating direction select (drC)
14 Output current 2
15 Motor rpm 2
16 Inverter DC link voltage 2
17 User display select 2