Santerno Sinus M, User Manual

Page: 98 / 219

9-20
9.6 Stop method select

Decel to stop
Group Code Parameter Name Setting Range Initial Unit
Function group 1
F4 [Stop mode select] 0
0 ~ 3 0

Select 0 {Decel to stop} in F4 code.

Motor decelerates to 0 Hz and stops during the time set.

DC braking to stop
Group Code Parameter Name Setting Range Initial Unit
Function group 1 F4 [Stop mode select] 1 0 ~ 3 0

Select 1 {DC brake to stop} in F4 code.

Refer to page 10-1.

Coast to stop
Group Code Parameter Name Setting Range Initial Unit
Function group 1
F4 [Stop mode select] 2
0 ~ 3 0

Select 2 { Coast to stop } in F4 code.

When RUN command is OFF, Output Frequency and voltage are shut down.
Operating
command
Freq.
Decel
time
Operating Command
Freq,
Voltage