Santerno Sinus M, User Manual, Page: 46 / 219

5-12

Parameter initialize
How to initialize parameters of all four groups in H93
FU group 2
1 -. In H0, press the Enter (

) key once.
2
-. Code number of H0 is displayed.
-. Increase the value to 3 by pressing the Up (

) key.
3 -. In 3 , press the Left (

) key once to move the cursor to the left.
4
-.
0
3 is displayed.
0
in
0
3 is active.
-. Increase the value to 9 by pressing the Up (

) key.
5
-. 9 3 is set.
-. Press the Enter (

) key once.
6
-. The parameter number is displayed.
-. Press the Enter (

) key once.
7
-. Present setting is 0.
-. Press the Up (

) key once to set to 1 to activate parameter initialize.
8 -. Press the Enter (

) key twice.
9
-. Parameter initialize is complete.
-. Press either the Left (

) or Right (

) key.
10 -. Return to H0.