Santerno Sinus M, User Manual

Page: 145 / 219

10-45
10.25 Parameters Restore default / Lock

Parameters restore
Group Display Parameter Name Range Default
Function
group 2
H93 [Parameter initialize] 0
- 0
1 4 groups initialize
2 Drive group initialize
3 F1 group initialize
4 F2 group initialize
5 I/O group initialize

Select the group to be initialized and perform it in H93 code.

Press Enter (

) key after set H93. H93 will be displayed again after initialization is complete.

Password register
Group Display Parameter Name Setting Range Default Unit
Function
group 2
H94 [Password register] - 0 ~ FFFF 0
H95 [Parameter lock] - 0 ~ FFFF 0

Register password for Parameter lock (H95).

Password should be Hex decimal. (0 ~ 9, A, B, C, D, E, F)
Caution:
Do not forget the registered password. It is used when unlocking the parameters.

Factory default password is 0. Enter the new password except 0.

Follow the steps below when you register the password for the first time.
Step Note Keypad display
1 Move to H94 code. H94
2 Press Enter (

) key twice. 0
3 Register password. (Ex: 123) 123
4 123 will blink when Enter (

) key is pressed. 123
5 Press Enter (

) key. H94