Santerno Sinus M, User Manual, Page: 52 / 219

7-2
LED
display
Parameter
name
Setting
range
Description
Factory
defaults
Adj.
during
run
rPM [Motor RPM] Displays the number of Motor RPM. - -
dCL [Inverter DC
link voltage]
Displays DC link voltage inside the
inverter.
- -
vOL [User display
select]
This parameter displays the item
selected at H73- [Monitoring item
select].
vOL -
vOL Output voltage
POr Output power
tOr Torque
nOn [Fault
Display]
Displays the types of faults, frequency
and operating status at the time of the
fault
- -
drC [Direction of
motor
rotation
select]
F, r Sets the direction of motor rotation
when drv - [Drive mode] is set to 0.
F O
F Forward
r Reverse
drv2
1)
[Drive mode
2]
0 ~ 3
0 Run/Stop via Run/Stop key on the
keypad
1 X
1 Terminal
operation
FX: Motor forward run
RX: Motor reverse run
2
FX: Run/Stop enable
RX: Direction
3
RS485
Communication
Frq2
1)
[Frequency
setting
method 2]
0 ~ 7 0 Digital Keypad setting 1 0 X
1 Keypad setting 2
2 Analog V1 1: –10 ~ +10 [V]
3 V1 2: 0 ~ +10 [V]
4
Terminal I: 0 ~ 20
[mA]
5
Terminal V1 setting 1
+ Terminal I
6
Terminal V1 setting 2+
Terminal I
7 Digital
RS485
Communication
1)
:
Displayed only when one of the Multi-function input terminals 1-8 [I17~I24] is set to “22”.