Santerno Sinus M, User Manual, Page: 43 / 219

5-9

Changing parameter value in Input/Output group
When changing the parameter value of F28 from 2 to 5
FU group 1
1 -. In F0, press the Ent (

) key once.
2
-. Check the present code number.
-. Increase the value to 8 by pressing the Up (

) key.
3 -. When 8 is set, press the Left (

) key once.
4
-.
0
in
0
8 is active.
-. Increase the value to 2 by pressing the Up (

) key.
5
-. 2 8 is displayed
-. Press the Ent (

) key once.
6
-. The parameter number F28 is displayed.
-. Press the Ent (

) key once to check the set value.
7
-. The preset value 2 is displayed.
-. Increase the value to 5 using UP key (

).
8 -. Press the Ent (

) key twice.
9
-. Parameter change is complete.
-. Press either the Left (

) or Right (

) key.
10 -. Moving to first code of Function group 1 is complete.
♣ The above setting is also applied to change parameter values in function group 2 and I/O
group.