Santerno Sinus M, User Manual, Page: 69 / 219

7-19
LED
display
Parameter
name
Min/Max
range Description
Factory defaults
Adj.
during
run
LED
display
I17 [Multi-function
input terminal
P1 define]
0 ~ 29
0 Forward run command 0 O
1 Reverse run command
I18 [Multi-function
input terminal
P2 define]
2 Emergency Stop (Est) 1 O
3 Reset when a fault occurs {RST}
I19 [Multi-function
input terminal
P3 define]
4 Jog operation command 2 O
5 Multi-Step freq – Low
I20 [Multi-function
input terminal
P4 define]
6 Multi-Step freq – Mid 3 O
7 Multi-Step freq – High
I21 [Multi-function
input terminal
P5 define]
8 Multi Accel/Decel – Low 4 O
9 Multi Accel/Decel – Mid
I22 [Multi-function
input terminal
P6 define]
10 Multi Accel/Decel – High 5 O
11 DC brake during hold
I23 [Multi-function
input terminal
P7 define]
12 2nd motor select 6 O
13 -Reserved-
I24 [Multi-function
input terminal
P8 define]
14 -Reserved-
7 O
15 Up-
down
Frequency increase
(UP)
command
16 Frequency decrease
command (DOWN)
17 3-wire operation
18 External trip: A Contact (EtA)
19 External trip: B Contact (EtB)
20 Self-diagnostic function
21 Change from PID operation
to normal operation
22 2nd source select
23 Analog Hold
24 Accel/Decel hold
25 Up/Down Save Freq.
Initialization
26 JOG-FX
27 JOG-RX
28 Open Loop1
29 Fire Mode
* See “Chapter 14 Troubleshooting and maintenance” for External trip A/B contact.
* Each multi-function input terminal must be set differently.