Santerno Sinus M, User Manual

Page: 23 / 219

3-1
CHAPTER 3 - WIRING
3.1 Terminal wiring (Control I/Os)
Note: Wiring relates to the NPN configuration (see PNP/NPN selection and connector for
communication option).
T/M Description
MO
Multi-function open collector output
MG
MO Common
24 24V output
P1
MF input terminal
(factory setting)
FX: Forward run
P2 RX: Reverse run
CM
Input signal common
P3
MF input terminal
(factory setting)
BX: Emergency stop
P4
RST: Trip reset
P5 JOG: Jog operation
CM
Input signal common
P6
MF input terminal
(factory setting)
Multi-step freq.-Low
P7
Multi-step freq.-Middle
P8 Multi-step freq.-High
VR
10V power supply for potentiometer
V1 Freq. Setting Voltage signal input: –10~10V
I
Freq. Setting Current signal input: 0~20mA
AM Multi-function analog output signal: 0~10V
3A Multi-function
relay output
terminal
A contact output NO
3B B contact output NC
3C A/B contact common
S+
RS485 communication terminal
S-
※ For connection to Remote Option or
parameter copy.