Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
219
219
219
219
219
Question
Answer
The configuration of my console (Tracker ball, Screen
Off, etc.) has suddenly changed , settings and IP numbers
have changed.
In the NETWARE CONNECTIONS menu, I cannot see some
consoles, although they are in the network.
Can I select active fixture (e.g. an active Cue)
automatically to form a group?
Can I exchange fixtures that are part of a seqency? e.g.
dimmers of another manufacturer, or fixtures having
more features?
Group master moves on each page, even if the fader is
„empty“; or a group master moves, although it was not
switched on.
If the DELETE SHOW button was pressed while loading a
show, alle configuration settings were reset to their
defaults. All settings must then be entered anew. Sorry.
The consoles have different version numbers and will,
therefore, not be recognized by the network. Update
the consoles to the current software version.
All fixtures of a Cue can be selected using the EDIT
function< in this setting, you can save a group using
STORE, that is a SELECT ALL ACTIVES function, so to
speak.
If you delete or exchange fixtures in the SETUP, all values
of the matching sequence that are not necessary, will
also be deleted (cannot be restored). I.e. if a new fixture
does not have e.g. a color wheel, the color wheel values
for this ID will be deleted - and cannot be triggered,
even if you install the old fixture again afterwards.
If the new fixture has more features than the old one,
these will not be accounted for.
It is recommended to copy the show to another name
and test exchanging the fixture there.
Under LOOPS / LINKS (possibly in a macro, too) only the
fader number without page number has been entered
for the sequence - e.g. fader 14 instead of 1.14; that is
why fader 14 will be moved, disregarding the program
for this fader.
