MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
94
94
94
94
94
4 . 3 . 5
4 . 3 . 5
4 . 3 . 5
4 . 3 . 5
4 . 3 . 5 Moving Cues
Moving Cues
Moving Cues
Moving Cues
Moving Cues
Press the MOVE Key once (LED is on).
Press the SEQUENCE Key once (LED is on).
Using the keypad, enter the number of the Sequence in which Cues are to be moved.
Press the CUE key once (LED is on).
Using the keypad, enter the number of the first Cue to be moved. If only one Cue is to be moved, continue with the
AT key.
Pressing the +Key will move the selected cue and the cue indicated by the subsiquent number
Pressing the THRU kKey on the keypad will move the Cues from...to
(including last Cue)
(including last Cue)
(including last Cue)
(including last Cue)
(including last Cue)
.
created profiles to.
Open the Cue overview
click on the cell in the DIM PATH column (for the FADE profile of the dimmer) or MOVE PATH (for the FADE
profile of the PAN/TILT movement) and press on the right Encoder.
The SELECT FADE PATH menu will open.
- select a ready-made profile
Select a profile from the menu (number or profile name has a blue background), which will display the profile
as a graphics
press
SELECT PATH
The selected profile will appear in the PATH column.
For some of the pre-defined profiles, the curve position may partly lie outside of the coordinate system. A fixture can
follow this negative amplitude only, if it is not already positioned at it’s ultimate ‘stop’. For self-created profiles,
you cannot place the curve outside of the coordinate system.
- assigning a self-created profile to a FADE path
Select an empty path from the menu (user 1 to user 16)
- press NO PATH, if you don’t want to assign a profile
- press LOAD PROFILE, if you want to assign a self-created profile to the path
- press SELECT PATH, so that the profile will be put into the PATH column of the Cue.
or create or modify a profile
Select an empty profile from the menu (user 1 to user 16)
press EDIT PROFILE, to create a new profile, or to modify an existing one
from the ALLE PROFILES overview, select an existing profile to be modified
or
in the ALL PROFILES overview, click on the NEW PROFILE line, press on the right Encoder and enter a name;
confirm with OK.
As default, the new profile will contain a diagonal line.
a touch on the coordinate system will create a cross-hair pointer. Use ADD POINT to insert an intersection, or
delete the point at the pointer using DELET POINT.
