MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
32
32
32
32
32
If you finished selecting all Scanner functions, you can proceed with the presets.
Presets are:
- Type
- Snap
- Inv
- Default (can be adjusted with the left Encoder)
- Highlight (can be adjusted with the second Encoder)
- Stage (presently without any function)
- MIB FADE (can be adjusted with the right Encoder)
- Profil
- Speed
2.5
2.5
2.5
2.5
2.5
Listing of the individual functions in the EDIT FIXTURE menu
The values are displayed as percentages and can be switched to decimal or hexadecimal by pressing the Percent
button.
For the individual functions (e.g. GOBO), so-called Channel Values can be created. These will then be displayed in
the Fixture Sheet. You can switch to the menu by using the Function Sets button.
2.7
2.7
2.7
2.7
2.7
Function Sets.
You can leave this menu by using the
XXXXX
button. You could now use the created fixture in this Show.
The settings will only take effect and be saved after leaving the Full Access menu and pressing the SAVE button.
Momentarily, the created fixture can only be used for this Show.
If you want to have this fixture available in the general Library (on harddisk or floppy), too, you have to UPDATE
them (save to disk or floppy).
2.5
2.5
2.5
2.5
2.5
Updating the Scanner Library (USER-Library)
Delete self created fixtures
In the
Tools-menu you can delete (permanent) self created or varied fixtures from the library. You can not delete
fixtures from factory desk library.
- In the menu
Tools press the button Manage Fixture Library
- Select the fixture and press
Delete Entry
- With the filters you can display fixtures of the desired manufacturer or names
- With
Harddisk/Floppy choose store medium, mostly its Harddisk.
2.7 Function Sets - Names (Channel Values) and Presets
Function Sets - Names (Channel Values) and Presets
Function Sets - Names (Channel Values) and Presets
Function Sets - Names (Channel Values) and Presets
Function Sets - Names (Channel Values) and Presets
In this menu, you can create or adjust so-called Channel Values (names) for the individual functions (e.g. GOBO).
These names will then be displayed in the Fixture Sheet instead of the number value. Furthermore, you can assign
