MA lighting grandMA, Operating Manual

Page: 85 / 232

Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
85 85
85 85 85
4 . 1 4 . 1
4 . 1 4 . 1 4 . 1 Creating Cues (separate memories)
Creating Cues (separate memories)
Creating Cues (separate memories) Creating Cues (separate memories) Creating Cues (separate memories)
The actual stage setting can be stored as a Cue and be called up via the EXECUTOR buttons or faders.
- All changed changed changed changed changed (active) values (recommended setting),
- all - all - all - all - all momentary settings (complete Output),
- or all all all all all values of the selected selected selected selected selected Fixtures and channels can be stored as Cues.
4 . 1 . 1 4 . 1 . 1 4 . 1 . 1 4 . 1 . 1 4 . 1 . 1 Creating new Cues Creating new Cues Creating new Cues Creating new Cues Creating new Cues
Create the look on stage by direct access or presets. 3.4 3.4 3.4 3.4 3.4 and 3.5 3.5 3.5 3.5 3.5 Accessing Dimmer Channels directly or 3.7 3.7 3.7 3.7 3.7
Calling up Presets
This look shall now be stored as CUE in the following way :
Press the STORE key and hold hold
hold hold hold
it. The following options and encoder names will appear on the right TFT
display:
Press one of the following keys (selected key will receive dark-grey background colour):
- Active Values: Store
only only only only only
the
active active active active active
values (all values in the FIXTURE/CHANNEL window which are shown
with a red background colour red background colour red background colour red background colour red background colour ).
- All: Store all all all all all settings (all fixture and channel values).
- All for Selected Devices:
All All All All All
values of the
selected selected selected selected selected
fixtures and channels will be stored (the
fixture/channel numbers will be marked in yellow).
Release the STORE key (LED stays on).
For this this this this this CUE, set the following parameters via the encoders:
-
Trigger: Call of the CUE by GO, SOUND or FOLLOW (i.e. after previous cue in the sequence has completed) or
automatically after an amount of time.
-
Fade: CUE will be played back with the set time; this is only possible with “FADE“ functions. 2.3 2.3 2.3 2.3 2.3
Single
Channel-specific Adjustments for the Current Show (point 10) and
2.5 2.5 2.5 2.5 2.5
EDITING FIXTURES (modify) (point 9)
-
Delay: CUE will be called up delayed by the time set; only possible for the „FADE“ functions.
-
Snap-Delay: The Snap values of the CUE will be played back after the set period of time (only with “SNAP”
functions).
Pressing the In Fades button will switch it over to Out Fades:
-
Out Fade: Dimmer channels, which reduce their level reduce their level reduce their level reduce their level reduce their level in the next Cue, will be faded with the set period of
time.
-
Out Delay: delays the outfading
Cues can be stored on EXECUTOR faders or EXECUTOR button.
Define the assignment position of the Cue by pressing the EXECUTOR button once. When storing to an EXECUTOR
FADER, press a button above or below the fader once.
The CUE is now assigned to this EXECUTOR button or EXECUTOR fader and stored in the Sequence Pool. This way
it is possible, to assign the same Cue more often than once.
5.1 5.1 5.1 5.1 5.1
ASSIGN menu (Assignment to EXECUTOR)
Repeat all steps to create the next Cue.
Pressing the CLEAR key: once - will delete the selection, twice – will delete the active values and reset all
values then.