MA lighting grandMA, Operating Manual

Page: 66 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: info@malighting.de
66 66
66 66 66
.
- Fades: FADE times will be displayed.
- Delays: DELAY times will be displayed.
-
Values Only: Only values (without presets) will be displayed, but no effects and profiles.
-
Output: The DMX output values will be displayed, but without taking any profiles into account!
-
Executor ID: The Executor’s number and page will be displayed.
- Cue ID: The sequence’s number and the respective Cue will be displayed.
- Automatic: If this key is pressed, the display will automatically toggle between the different options when
toggling with the TIME key.
-
Layer Control: If “On“ is chosen, a control bar appears below the Scanners. By pressing on the individual buttons
on the control bar, the display in the window will be switched accordingly.
-
Preset Control: If “On“ is chosen, a control bar appears below the Scanners. For each function, there is a separa-
te button. By pressing on the individual buttons on the control bar, the appropriate function will be activated and
can be modified using the Encoders.
In the right upper corner of each button, you’ll find a small square. If this square has a black background, the
respective function has not been modified. If the background is red, something has been changed in this function.
If pressing the Sorting & Readout button (displayed with a green font):
Sort by:
With the respective key, you can determine according to which criteria the fixtures within the column are to be
sorted.
-
Numbers: Fixtures will be sorted by numbers in the FIXTURE window.
-
Names: Fixtures will be sorted by name.
- Selected: The selected selected selected selected selected Fixtures will be moved upwards.
- Active: Fixtures for which a value is activated activated activated activated activated , will be moved upwards.
Sort Directions:
-
Values: Fixtures will be sorted according to highest dimmer value.
-
Sort Upwards: Sorting by ascending values.
-
Sort Downwards: Sorting by descending values.
-
READOUT: Pressing this function, you can switch between the following display options.
-
Percent: Values will be displayed as percentages.
-
P: Values will be displayed as percentage values; interim values will be displayed next to the figure in
form of 3 dots.
-
Decimal: Values will be displayed as decimal numbers (0–255).
-
HEX: Values will be displayed as hexadecimal numbers (0–FF).
-
FONT: By pressing this function, you can switch the font size in the FIXTURE window between Huge (very big),
Big and Small.
This window can be deleted by pressing the DELETE WINDOW key.
Pressing the X key will close the Option Window.
These settings will all be stored when VIEWS are stored (
3.2 3.2 3.2 3.2 3.2
Storing VIEWS).