Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
141
141
141
141
141
accidentally deleting something is reduced.
Moving Events
Moving Events
Moving Events
Moving Events
Moving Events
Graphically with the mouse:
Graphically with the mouse:
Graphically with the mouse:
Graphically with the mouse:
Graphically with the mouse:
- Choose the MOVE mouse tool. The cursor will show a hand with a little arrow. The corner of the arrow is the “hot
spot” of the cursor.
- Left click INSIDE the selection or on an event and keep mouse key pressed.
- Drag the mouse horizontally. The selection/current event will follow.
With encoder within the bar:
With encoder within the bar:
With encoder within the bar:
With encoder within the bar:
With encoder within the bar:
- Make a selection or select the current event.
- Turn the MOVE encoder (furthest to the right). For every click of the encoder, you will move the selection/
current event by one frame.
- If you press and turn the encoder for every click you will move one second.
- If you press it without turning, you can enter a new start time for your selection/current event. This input can
be a relative movement if you use signs ( “-1.5” will move your selection 1.5 seconds backwards in time).
In text mode:
In text mode:
In text mode:
In text mode:
In text mode:
- Edit the Time column (by right clicking with the mouse or press the XY-encoder).
- The movement will be relative if you use the signs, otherwise it will be absolute.
Editing an Event
Editing an Event
Editing an Event
Editing an Event
Editing an Event
You can only edit an already existing event (see Adding Events).
Editing an event means to change its data. If you want to change its time, look for MOVING EVENTS.
Graphically with the mouse:
Graphically with the mouse:
Graphically with the mouse:
Graphically with the mouse:
Graphically with the mouse:
- Right click on an event and the Edit menu appears according to the type of the event.
With the event encoder in the bar:
With the event encoder in the bar:
With the event encoder in the bar:
With the event encoder in the bar:
With the event encoder in the bar:
- Select current event with the track and event encoder.
- Then press the event encoder.
Edit menus will appear.
In text mode:
In text mode:
In text mode:
In text mode:
In text mode:
- Scroll to the event that you are looking for.
- Edit the appropriate column by right clicking or pressing on the XY encoder. The parameter column is only
editable for GOTO commands and for fader events.
Special fast edit for fader-events in graphic mode:
Special fast edit for fader-events in graphic mode:
Special fast edit for fader-events in graphic mode:
Special fast edit for fader-events in graphic mode:
Special fast edit for fader-events in graphic mode:
- This method is not exact enough for speeds, but for master fader events it is recommended.
- Click with the middle mouse key on an event and keep the mouse key pressed.
- Drag the mouse vertically with middle mouse key pressed. The value of the fader event will now follow.
