Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
29
29
29
29
29
Some Attributes cannot be moved (e.g.: Color Mix1). This is indicated by the word “Unmoveable“ in the table on the
right of the respective Attribute.
The changes will take effect and will be saved only after leaving the Full or Live Access menu and pressing the
SAVE button.
2.4.2 Encoder (Activation) Grouping
2.4.2 Encoder (Activation) Grouping
2.4.2 Encoder (Activation) Grouping
2.4.2 Encoder (Activation) Grouping
2.4.2 Encoder (Activation) Grouping
All settings within this menu will affect the storing of Cues, Presets and creating of Presets (Create Preset menu).
Attention! This menu is important and can influence all of your programming!
Call up this menu by pressing the „Encoder (Attribute) Grouping” key in the Preset and Feature Assignment.
The Attributes combined in a group will be activated and stored when they are changed (e.g. Pan and Tilt).
In the Attribute Setup menu (see 2 pages earlier), open this menu by pressing the Encoder Grouping button.
By selecting a group, the appropriate Attributes will be displayed in the table on the lower left side.
- Pressing the „Add Group“ key will create a new group.
In order to delete a group, this group has to be selected first. Now, press the „Delete Group“ key. The group will be
deleted, the Attributes will automatically be added to the Free Attributes.
- In this column, the Attributes of the selected group will be displayed. By selecting an Attribute, this will be
removedfrom this group and added to the Free Attributes.
- In order to assign Free Attributes to another group, this group has to be selected first. Selecting the Attribute will
add it to the currently selected group.
- By pressing the „Default“ key, all groups except 3 will be deleted. Almost all Attributes will be displayed as Free
Attributes in the right column. In the remaining 3 groups, the fixed Attributes (Pan/Tilt, Col.Mix1-4 and Blade1A-
4B) are allocated. These Attributes can
not
not
not
not
not
be moved into other groups (indicated by “fix” next the Attribute’s
name).
The changes will take effect and will be saved only after leaving the Full or Live Access menu and pressing the
SAVE button.
2 . 5
2 . 5
2 . 5
2 . 5
2 . 5 Modifying Scanners (FIXTURE TYPES)
Modifying Scanners (FIXTURE TYPES)
Modifying Scanners (FIXTURE TYPES)
Modifying Scanners (FIXTURE TYPES)
Modifying Scanners (FIXTURE TYPES)
In the Full Access menu, open this menu by pressing the
Fixture Types button.
The upper part of the Display shows all fixtures that are currently used in the Show.
-
No: Numerical of the individual fixtures currently signed-on in this Show. If this number is displayed in red and with
an asterisk, this fixture has been modified..
- Qty: Number of fixtures of this type.
- Name: Name of the fixture from the Library. By selecting it, you can change the name directly using the keyboard.
- Shortname: Here, you can enter an abbreviation or short name.
