Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
27
27
27
27
27
press
PATCH SHEET
press
FIXTURE PATCH or CHANNEL PATCH
Listing of individual functions
DMX: Shows the patched channel. If this is to be adjusted, click into the cell and rotate the Display Encoder. The
Fixtures to Patch menu will open.
2.2.2
2.2.2
2.2.2
2.2.2
2.2.2
Patching Scanners/Dimmers
NoMaster: If a cell contains a No here, the function of the Grandmaster-Faders is not active for this fixture.
2.2.5
2.2.5
2.2.5
2.2.5
2.2.5
Switching the Master (GRANDMASTER FADER) off (one page earlier).
Pan/Tilt/Swap: If a cell contains a Yes here, the function will be inverted or completely exchanged.
2.2.5
2.2.5
2.2.5
2.2.5
2.2.5
Inverting or changing PAN or TILT.
2.4
2.4
2.4
2.4
2.4 Adjustments in the ATTRIBUTE
Adjustments in the ATTRIBUTE
Adjustments in the ATTRIBUTE
Adjustments in the ATTRIBUTE
Adjustments in the ATTRIBUTE SETUP
SETUP
SETUP
SETUP
SETUP menu
menu
menu
menu
menu
In the „Attribute Setup” menu, you can change the names of Preset and Features Groups. Furthermore, you can
create or adapt new Features Groups. Furthermore, you can define, which attributes will be activated together or
individually.
But first a short explanation about the differences between Presets, Features and Attributes:
Attribute:
Attribute:
Attribute:
Attribute:
Attribute:
Attributes are individual functions of Fixtures like Gobo1, Focus, Iris, Pan, Tilt ...
Feature:
Feature:
Feature:
Feature:
Feature:
Features are groups, in which several Attributes are combined. In the Fixture Sheet, the first line will
display all Features available. Below the individual Features, the respective Attributes are displayed.
Presets:
Presets:
Presets:
Presets:
Presets:
In a preset, the value of one or more Attributes can be stored. Presets are divided in different Preset Groups
(Gobo, Colour, …).Features are allocated to the individual Preset Groups.
By pressing a FEATURE key with the function (in this case, Dimmer), you can select the different Feature Groups
for the Preset Group selected to change the individual Attributes using the Encoder.
Here, the individual Attributes are displayed that can be changed with the respective Encoder.
2.4.1 Preset, Feature and Attribute Setup
2.4.1 Preset, Feature and Attribute Setup
2.4.1 Preset, Feature and Attribute Setup
2.4.1 Preset, Feature and Attribute Setup
2.4.1 Preset, Feature and Attribute Setup
Attention! This menu is important and can influence all of your programming!
press
Full- or Live Access
open
Attribute Setup
The number of Preset groups is fix and cannot be modified. Furthermore, the names displayed in
red can’t either be
changed or deleted.
Changing the names of Preset groups, Features and Attributes
Changing the names of Preset groups, Features and Attributes
Changing the names of Preset groups, Features and Attributes
Changing the names of Preset groups, Features and Attributes
Changing the names of Preset groups, Features and Attributes
Click on a name, change it using the keyboard, and confirm with Enter. The modifications will only be executed
and saved after leaving the Full or Live Access menu and pressing the SAVE button.
The new name will now be displayed in the respective Preset window or in the Fixture window.
