MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
52
52
52
52
52
If a user loads a show for the very first time (he has never used this show before), this show will be loaded with the
previously used profile and NOT with his personal user profile. If needed, the personal user profile can be loaded
afterwards.
2.16.8 Saving* or Loading Profiles
2.16.8 Saving* or Loading Profiles
2.16.8 Saving* or Loading Profiles
2.16.8 Saving* or Loading Profiles
2.16.8 Saving* or Loading Profiles
User profiles are saved independently from the show and can thus be loaded for any other show afterwards.
Go to the
Tools menu and User / Setup.
Under
User Profile List
User Profile List
User Profile List
User Profile List
User Profile List
in the
New
New
New
New
New
line, enter a name for a new profile.
Select the user cell under
User List
User List
User List
User List
User List
in the
Profile
Profile
Profile
Profile
Profile
column. Press the Encoder , select the profile, and take
over by pressing it again.
If this user is logged in, the seetings will be saved to this profile when saving the profile (Save User Defaults).
If this user is not logged in, he receives a message, that his profile is empty. Confirm this message and a selection
menue pops up:
1) select a profile
2) select what to copy (button becomes dark green) or select
Everthing for complete profile
confirm with
COPY!
User with rights higher than PLAYBACK can press
Copy and change profiles of other user (not his own profile)
Save: save current settings (independently from the actual show) in your User Default Profile
Load: load your User Default Profile (independently from the actual show)
Loading user porfiles or part of profiles with the Micro:
press
TOOLS
press Load
User Profile List
User Profile List
User Profile List
User Profile List
User Profile List
.
select user an items in the
Load to current User Profile menu
confirm with
Load selected Items.
2.16.8 Forced Login at Desk Start*
2.16.8 Forced Login at Desk Start*
2.16.8 Forced Login at Desk Start*
2.16.8 Forced Login at Desk Start*
2.16.8 Forced Login at Desk Start*
Forced Login is enabled only if at least one user appears in the user list (TOOLS menu / User Configuration).
To change the Forced Login setting, you need to have administrator privilege level:
Go to
Tools menu.
Go to
User / Setup.
- Press the FORCE LOGIN AT DESKSTART key.
If you switch on FORCED LOGIN, upon every desk start or loading of a show, the desk will automatically bring up
the login screen.
If FORCED LOGIN is switched off, upon desk start the desk will automatically login the user who was last logged in.
2.16.9 Who is logged in at the moment?
2.16.9 Who is logged in at the moment?
2.16.9 Who is logged in at the moment?
2.16.9 Who is logged in at the moment?
2.16.9 Who is logged in at the moment?
- Go to the
Tools menu.
- Look at the title bar of the window.
It says “
Tools Menue , current user is …
”.
