Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
91
91
91
91
91
4 . 3
4 . 3
4 . 3
4 . 3
4 . 3 Editing Sequences
Editing Sequences
Editing Sequences
Editing Sequences
Editing Sequences
During editing procedures, you can change
all
all
all
all
all
values of cues, add values or delete them. The X-FADE and DELAY
times can be altered and the trigger of cues via GO key, X-FADER, SOUND or TIME can be defined.
Apart from what is indicated in this chapter, there are three other ways of editing:
4.1.3, 4.1.4, 4.1.5
4.1.3, 4.1.4, 4.1.5
4.1.3, 4.1.4, 4.1.5
4.1.3, 4.1.4, 4.1.5
4.1.3, 4.1.4, 4.1.5
Overwriting, expanding, removing Cues
4.3.4
4.3.4
4.3.4
4.3.4
4.3.4
Update Cues or Presets
5.3
5.3
5.3
5.3
5.3
EXECUTOR window
Press the EDIT key (LED is on). The sequence may not be saved, see 4.2.6
Select the sequence with the respective EXECUTOR button.
Or:
Or:
Or:
Or:
Or:
Left click with the mouse into the small window above the EXECUTOR Fader or use the touchscreen.
The EDIT menu appears on the right TFT display, showing a listing of the individual cues contained in the selected
sequence.
You will find the addressed EXECUTOR fader or button in the headline, giving the number of the PAGE and the
sequence name.
The second line will give you the functions of the columns.
-
No.: Number of Cue
-
NAME: Name of Cue
-
MIB: Activate MIB (Move In Black function) individually for each cue. Activate it by selecting a cell and shortly
pressing on the encoder on the right side of the display. Activation is confirmed by YES.
MIB can only be used in cells where a “
*****
“ is displayed.
-
Trig: The trigger for the Cue (GO button, SOUND, TIME or FOLLOW)
If the
TIMES key on the title bar of the edit window is pressed:
-
Fade: FADE time
-
Outfade: Duration of the fade time on Dimmer channels which are reducing in value
-
Delay: CUE will be called up delayed by the time set; only possible for the „FADE“ functions
-
Outdelay: Outfade will called up delayed by the time set
-
Snap: Duration of the DELAY
-
I.Fade: Duration of the individual FADE time (min and max)
-
I.Delay: Duration of the individual DELAY time (min and max)
If the
LOOPS key on the title bar of the edit key is pressed:
-
LOOP: Will initiate a jump after the cue that includes the loop statement has finished
-
LOOPDELAY: The length of time or the number of occurences of a LOOP will be displayed
-
LINK: The Command Line Order to be triggered will be displayed
-
LI. DEL: The delay value for the execution of the Command Line Order will be displayed
If the
EFFECTS key on the title bar is pressed:
-
EFFECTS: Display of the effects calls
A second sheet will appear in the lower part of the display:
-
NO.: Number of the Effect
-
NAME: Name of the Effect
