MA lighting grandMA, Operating Manual

Page: 132 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: info@malighting.de
132 132
132 132 132
press „ X“ to return to the EDIT menu
enter the values for the individual functions (e.g. horizontal shift or rotation).
Enter preset values: (if TOGGLE is active = is green, you can combine multiple settings)
- ROTATE RIGHT will insert „0° - 360°“ into the Rotation column
- ROTATE LEFT will insert „360°“ into the Rotation column
- SCROLL LEFT will insert „-5.0 – 5.0“ into the OFFSET X column
- SCROLL RIGHT will insert „5.0 – -5.0“ into the OFFSET X column
- ZOOM IN will insert the „100% - 50%“ into the SCALE X and SCALE Y columns
- ZOOM OUT will insert the „100% - 200%“ into the SCALE X and SCALE Y columns
or
Enter individual values:
- click on the cell in the respective column and open it by pressing on the Encoder; enter values and confirm with
ENTER
- TABLE; here, you can select the effect
- FROM TO; here, you can enter the starting and end points
- PHASE; here, you can enter the angle to shift the effect
- RATE stands for the ratio d
set ACT ON; depending on the setting and type of BITMAP, the buttons below are active (bright – values can be
entered) or inactive (dark – no modifications possible). The values allocated to the bitmap are marked by a violet bar
over the respective column in the Fixture or Channel Sheet.
-
GREY: dimmer values are assigned to the graphics element
-
TRIGGER: presets are assigned to the graphics element
- Preset 1 - the preset is assigned to the graphics background
- Preset 2 - the preset is assigned to the graphics
- Background - the preset is assigned to the matrix outside the graphics
- COLOR: color values are assigned to the graphics element
define the order using the 4 Encoders
- MASTER here, you can set the dimmer value
- SPEED here, you can set the effect speed. (however, the graphic’s movements also depend on the settings FROM
– TO, SPEED SCALE, and RATE)
- FADE here, you can
- MASTER FADE here, you can set the time to fade out and fade in the effect after start and stop
enter a name for the BITMAP EFFECT in the
LABEL line and confirm with ENTER.