Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
201
201
201
201
201
16.4.2
16.4.2
16.4.2
16.4.2
16.4.2 111110 Base-T EtherNet
0 Base-T EtherNet
0 Base-T EtherNet
0 Base-T EtherNet
0 Base-T EtherNet
The most common EtherNet connection is the “twisted pair” link using 10 Base-T EtherNet. Hereby a peer-to-peer
connection is established by minimum 4-wire cable connection at a maximum length of 100 metres. The cable is
always equipped with 8-pole RJ-45 crimp-connectors.
“Twisted pair” cable to be used for 10 Base-T with RJ-45 connectors
Pin numbers on RJ-45 connector and 10 Base-T standard signal assignment
As 10 Base-T EtherNet always requires an EtherNet hub to distribute the signal (connections from console to
console go via a hub) a useful application will be any network where more than two consoles or consoles with ad-
ditional equipment (such as ArtNet DMX-Nodes) are proposed.
For a simple peer-to-peer connection between two consoles a “crossed” 4-wire cable MUST be used.
“Crossed” cable to be used for 10 Base-T peer-to-peer connections
