Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
59
59
59
59
59
3 . 4
3 . 4
3 . 4
3 . 4
3 . 4 Accessing Fixtures directly (in the FIXTURE SHEET)
Accessing Fixtures directly (in the FIXTURE SHEET)
Accessing Fixtures directly (in the FIXTURE SHEET)
Accessing Fixtures directly (in the FIXTURE SHEET)
Accessing Fixtures directly (in the FIXTURE SHEET)
Individual fixture functions can always be accessed directly and multiple fixtures can be controlled at the same
time. The selection will determine which fixtures react to Direct Access procedures (selected fixtures will be
marked in yellow writing in the FIXTURE window).
Within the FIXTURE window, you can locate, select and execute all functions for all fixtures.
Select the fixtures, where you wish to modify a value (the selected fixtures will be displayed in yellow characters).
Selection:
Call up a fixture group.
3.3
3.3
3.3
3.3
3.3
Creating and calling up Fixtures and Dimmer GROUPS
o r :
o r :
o r :
o r :
o r :
Select fixtures using the touchscreen.
o r :
o r :
o r :
o r :
o r :
Select fixtures by using the Fixture key and the numeric keypad.
3.3
3.3
3.3
3.3
3.3
Creating and calling up Fixtures and Dim-
mer GROUPS
o r :
o r :
o r :
o r :
o r :
A left mouse click on the individual fixtures.
Select the requested function by clicking on the relevent key on the Preset Control Bar. Switch on the Preset
Control Bar.
3.4.8
3.4.8
3.4.8
3.4.8
3.4.8
Options in the Fixture Window.
Values can now be changed via the encoders, located below the right TFT display (all functions of the
encoders will be displayed directly on the screen):
The various functions can now be toggled by pressing the FEATURE key.
o r :
o r :
o r :
o r :
o r :
The Trackball affects the PAN/TILT function only (if switched to Pan & Tilt).NOTE: Fixtures, the beams of which
cannot reach the preset position, will go to Blackout; this way, no undefined positions will be triggered.
o r :
o r :
o r :
o r :
o r :
The wheel affects dimmer values only.
o r :
o r :
o r :
o r :
o r :
Any value may be altered by clicking and holding on it with the middle mouse key and moving the mouse.
For storing settings.
44444
Cues and Sequences
For creating Presets.
3.7
3.7
3.7
3.7
3.7
Creating and calling up Presets
To call up or create Effects.
6
6
6
6
6
Effects
If you wish to modify the selection
or
or
or
or
or
the activated values of the fixtures:
Press the CLEAR key:
When pressing the CLEAR key the
first
first
first
first
first
time, the selection of fixtures will be deselected from the OUTPUT window
(yellow characters turn grey).
The
modified
modified
modified
modified
modified
(active) values will be kept and displayed with red background.
Press the CLEAR key again:
When pressing the CLEAR key the
second
second
second
second
second
time, the activation of modified values will be canceled (they will no
longer have a red background).
Press the CLEAR key one more time:
When pressing the CLEAR key the
third
third
third
third
third
time, all modified values will be reset (default or to their original setting
prior to the activation).
After pressing the CLEAR key for the first time, the yellow LED in this key will flash. This means that only the
selection was deleted. When you select other fixtures or dimmer channels now, the yellow LED will no longer flash.
