Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
67
67
67
67
67
If the Settings button is pressed (displayed with text in green):
Using the respective button, you can display the following items
- Physical Values: in P/T degrees can be displayed
- Display Color Mix: CMY can be displayed
- Display Wheels: Gobos can be displayed
- Programmer only: The Fixture sheet will only show those fixtures and their features, whose values were
changed; to change values not displayed, press on the magenta PROGRAMMER ONLY button in the Layer
Control bar so that the button turns grey, to display the complete Fixture sheet.
3 . 5
3 . 5
3 . 5
3 . 5
3 . 5 Accessing Dimmer Channels directly (in the CHANNEL
Accessing Dimmer Channels directly (in the CHANNEL
Accessing Dimmer Channels directly (in the CHANNEL
Accessing Dimmer Channels directly (in the CHANNEL
Accessing Dimmer Channels directly (in the CHANNEL
SHEET)
SHEET)
SHEET)
SHEET)
SHEET)
The individual dimmer channels can be accessed directly at any time.
Select the channels, which you wish to modify (selected channels will be displayed in yellow characters).
Selection:
- Select a dimmer group.
3.3
3.3
3.3
3.3
3.3
Creating and calling up Fixtures and Dimmer GROUPS
Or:
Or:
Or:
Or:
Or:
- Select dimmers via the CHANNEL key and the numeric keypad.
10
10
10
10
10
Command Line
Or:
Or:
Or:
Or:
Or:
- With Touchscreenn or a left mouse click on the individual channels.
Or:
Or:
Or:
Or:
Or:
- Make a left mouse click on the first channel and drag with the mouse holding the left mouse key down (creates
a
Loop
Loop
Loop
Loop
Loop
), all channels
in this loop
in this loop
in this loop
in this loop
in this loop
are
selected
selected
selected
selected
selected
.
Values can be modified
- with the encoders (Encoder assignment is displayed on the screen above) or with the wheel.
Or:
Or:
Or:
Or:
Or:
- By direct entry into the Command Line (AT functions) you can also enter dimmer values.
10
10
10
10
10
Command Line
Or:
Or:
Or:
Or:
Or:
- Select channels with a left mouse click and
hold
hold
hold
hold
hold
middle the mouse key down and drag; the value will be
modified
