Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
89
89
89
89
89
In the Default Sequence, Cues can be played back directly**
In the Default Sequence, Cues can be played back directly**
In the Default Sequence, Cues can be played back directly**
In the Default Sequence, Cues can be played back directly**
In the Default Sequence, Cues can be played back directly**
Press the GOTO key once (LED is on).
Enter the Cue number on the numeric keypad and confirm with ENTER. The Cue will be played back with the
set duration (
2.13
2.13
2.13
2.13
2.13
Settings in the DEFAULTS menu).
When played back Cues directly, you can enter a FADE or DELAY time using the TIME key.
After having entered the Cue number, press the TIME key for the FADE time once and enter the period of time
using the numeric keypad, or press the TIME key once more for the DELAY time, enter the duration using the
numeric keypad and confirm with enter. The Cue will be played back with the entered times.
The Cue will always be played back as if the Sequence was run from the very beginning. That means, all
previous steps will be accounted for with regards to the tracking of values(this depends on whether
Tracking had been activated in the ASSIGN menu. siehe 5.1.4 Executor Settings)
Besides the Master sequence, you can select multiple Executors as default sequences. These are indicated by a
dark-green title window - the Master sequence (only possible for 1 Executor) has a light-green title window. *All
default sequences can be operated at the same time if using the yellow buttons. All default sequences can also
be operated by using a combination of a command (e.g. GO+, Pause, OFF) and simultaneously pressing ENTER.
Hold the SELECT button down and click on the desired Executors (no effects or Bitmap effects); the first
Executor becomes the Master sequence (light green) and the following Executors become Default sequences
(dark green). This selection is temporary and cannot be saved in the Show file.
A further selection (holt the SELECT button and click on Exec) will delete the previous selection.
4 . 2 . 4
4 . 2 . 4
4 . 2 . 4
4 . 2 . 4
4 . 2 . 4 LOAD CUE
LOAD CUE
LOAD CUE
LOAD CUE
LOAD CUE
You can use LOAD CUE in order to directly call up a certain cue with either one or several executors.
Press the
GOTO key twice (LED is blinks)**.
Select an executor by shortly pressing a key.
A window with a chart appears. All cues of this sequence are listed in this chart.
If you select one of these cues, it will be loaded. This cue will be displayed as next (red blinking background) in
the small executor window above the executor.
TIPP
TIPP
TIPP
TIPP
TIPP
4 . 2 . 3
4 . 2 . 3
4 . 2 . 3
4 . 2 . 3
4 . 2 . 3Default Sequence (Master Sequence)
Default Sequence (Master Sequence)
Default Sequence (Master Sequence)
Default Sequence (Master Sequence)
Default Sequence (Master Sequence)
When creating sequences, Cues can directly be stored on a Default Sequence.
Press the SELECT key once (LED is on).
Select the respective EXECUTOR, which shall be the Default Sequence by pressing the respective EXECUTOR
button once. The headline of the small EXECUTOR window will be green.
To create the first Cue of the Default Sequence.
4.1
4.1
4.1
4.1
4.1
Creating Cues
Push STORE key 1x (LED flashes).
Push ENTER key 1x; the created cue is now stored in the Master Sequence.
If no EXECUTOR button has been selected before storing, and you confirm with ENTER, the stored Cue will always
be added to the current Default Sequence.
