MA lighting grandMA, Operating Manual

Page: 24 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: info@malighting.de
24 24
24 24 24
Inserting, deleting or moving fixtures Inserting, deleting or moving fixtures
Inserting, deleting or moving fixtures Inserting, deleting or moving fixtures
Inserting, deleting or moving fixtures
Select Fixture Layer.
Select a fixture. Pressing one of the buttons will have the following effects:
Add Line: Inserts a new fixture in front of the selected fixture.
Delete Line: Deletes the selected fixture. And all settings for this fixtures are deleted, too..
Moves Lines: Moves the selected fixtures to another position in the table. If using the “Moves Lines“ key,
this key will be displayed in red. By selecting a new position in the table, the fixture will be
moved to that new position..
Assigning fixture names Assigning fixture names Assigning fixture names Assigning fixture names Assigning fixture names
Click on the fixture’s name, enter a name directly, and confirm with Enter.
If a space and a number is added an automaticly enumerate of the names is made.
Adjusting ID Cha and Fix Adjusting ID Cha and Fix Adjusting ID Cha and Fix Adjusting ID Cha and Fix Adjusting ID Cha and Fix
Select one or more cells under ID Cha or Fix and press the Encoder. A window will open, in which you can
enter the IDs that will then be accepted, when Enter is pressed. Pressing “None“ will delete them. Please
avoid any overlappings.
Switching the Master (GRANDMASTER FADER) off: Switching the Master (GRANDMASTER FADER) off: Switching the Master (GRANDMASTER FADER) off: Switching the Master (GRANDMASTER FADER) off: Switching the Master (GRANDMASTER FADER) off:
Select one or more cells under Master and press the Encoder.
Now, select “No“ and press the Encoder one more time. If GRANDMASTER FADER is switched off, this will be
indicated by a “No“ in the respective cell.
Func. Pan / Func. Tilt Func. Pan / Func. Tilt Func. Pan / Func. Tilt Func. Pan / Func. Tilt Func. Pan / Func. Tilt
Select one or more cells under “Func.. Pan“ or “Func. Tilt“ and press the Encoder. Now, select “Invert“ and
press the Encoder one more time. If a function is inverted, this will be indicated by a “Invert“ in in the
respective cell.
DMX Pan DMX Pan DMX Pan DMX Pan DMX Pan / DMX Tilt DMX Tilt DMX Tilt DMX Tilt DMX Tilt
Here you can invert the DMX - signals for Pan and Tilt functions - the signals are only inverted in the DMX -Out-
put, not for the visualizer; this means, that movements in the visualizer and on stange will differ.
Select one or more cells under “DMX.. Pan“ or “DMX. Tilt“ and press the Encoder. Now, select “Invert“ and press
the Encoder one more time. If a function is inverted, this will be indicated by a “Invert“ in in the respective cel
Changing from PAN to TILT and vice versa Changing from PAN to TILT and vice versa Changing from PAN to TILT and vice versa Changing from PAN to TILT and vice versa Changing from PAN to TILT and vice versa
Select one or more cells under “Swap“ and press the Encoder. Now, select “Yes“ and press the Encoder one more
time. If PAN and TILT are changed, this will be indicated by a “Yes“ in in the respective cell.
This is where the useful „PAN/TILT trackball orientation“ can be set.
This can only be done in the Live Access menu.Check it out! Select a fixture, press HIGHLIGHT and let the Track-
ball „run“. Modifications will only be available after they have been saved. In cases like these, the HIGHLIGHT key,
among others, is very useful; if you keep the key pressed, selected lamps flashes for better identification.
TIPP TIPP TIPP TIPP TIPP
TIPP TIPP TIPP TIPP TIPP