MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
118
118
118
118
118
6 . 2
6 . 2
6 . 2
6 . 2
6 . 2 Editing Effect Groups
Editing Effect Groups
Editing Effect Groups
Editing Effect Groups
Editing Effect Groups
When choosing an Effect Group from the Effect Pool, respective keys will be displayed above the Encoders.
Pressing the
EDIT key
EDIT key
EDIT key
EDIT key
EDIT key
for this Effect Group will open the EDIT EFFECT menu.
Or:
Or:
Or:
Or:
Or:
Push Edit key (LED on) and a key in the Effect Pool. The EDIT EFFECT menu will appear in the right TFT display.
6 . 2 . 1
6 . 2 . 1
6 . 2 . 1
6 . 2 . 1
6 . 2 . 1 Editing Effects
Editing Effects
Editing Effects
Editing Effects
Editing Effects
In the title bar, the Effect Group to be modified will be displayed with its number and name. In the second line, the
column functions are listed:
-
Sel (Selection): Displays the numbers of Fixtures or Dimmers assigned to this Effect. If the Fixtures’ or Dimmers’
assignments are to be modified for an Effect, it has to be selected, this will be indicated by a red background.
Pressing the SHOW SELECTION key once will select the assigned Fixtures and Dimmers (displayed in yellow).
Select those Fixtures and/or Dimmers (will be displayed in yellow) that are to be assigned to this Effect. Now,
ress the TAKE SELECTION key once. The new number of Fixtures and Dimmers will now be inserted and adopted. If
an generic Effect Group is to be created (thats one without any selection which can then be used with any
selection), do
not select any Fixtures or Dimmers, but press the TAKE SELECTION key once. The cell will now
display a “Zero”. The key of this Effect Group will be indicated in red in the Effect Pool.
-
Filter: Here, a filter can be set that limits the execution of the Effect either to the odd-numbered or to the even-
numbered Fixtures. To assign a filter, select the cell. Press the Encoder right of the display once. The SELECT FIL-
TER window will open, where you can select a filter for this Effect.
-
Param (Parameter): Display of the assigned parameter for which the Effect has an influence over. To change
which parameter, select the cell and press the Encoder to the right of the display once. The SELECT PARAMETER
window will open, where you can select a different parameter for this Effect.
-
Table: Here, the assigned Effect is indicated with its name.
To re-assign an Effect, select the cell. Press the Encoder right of the display once. The SELECT TABLE window will
open, where you can select a different Effect for this function. The left part of the window displays the selected
Effect. If the Effect Group has been started, the Fixtures and Dimmers will be displayed on the Form mimic at the
bottom left of the display.
-
PWM: Pulse width modulation. The pulse width can be defined as follows: Press the EFFECT SETUP key once
In order to assign further Effects to the selected Fixtures/Dimmers in this group, press the Add Line key again. A
new line will be displayed and the Select Parameter window will open. Choose a function now and assign an Effect.
Up to 16 individual Effects can be combined within a Group.uss Edit key (LED on) and a key in the Effect Pool. The
EDIT EFFECT menu will appear in the right TFT display
