MA lighting grandMA Operating Manual Download Page 179

Page: 179 / 232

Hotline: +49 5251 688865-99

. Operating Manual grandMA Version 5.4

179

111111.2

1.2

1.2 Loading a Show from the internal harddisk

Loading a Show from the internal harddisk

press

BACKUP

press

HARD DISK

press

LOAD Show.

Press on the desired SHOW in the list. This will load the Show. .

The PLEASE CONFIRM window with the following options will open:

YES: To save the current Show before loading the new one.

NO: To load the new Show without saving the current one.

CANCEL: To abort this process.

The show will be loaded.

111111.3 Loading a empty Show

1.3 Loading a empty Show

press BACKUP

press

HARD DISK

press

Load Show

type the new name and confirm with Enter . The PLEASE CONFIRM window with the options will open:

YES: To save the current Show before loading the new one.

NO: To load the new Show without saving the current one.

A complete new and empty show will opwn.

Additionally, you can save an „empty“ Show to hard disk or floppy so that you can use it later when needed. This

way, you can also transfer demo shows, standard settings, etc. to others.

111111.4 Deleting the current show

1.4 Deleting the current show

The currently loaded Show cannot be deleted! In order to delete the currently loaded Show, you have to load

another Show first

111111.5

1.5

1.5 Deleting a Show from the internal harddisk

Deleting a Show from the internal harddisk

press

BACKUP

press

HARD DISK

press

DELETE Show

. In the list, click on the Show that is to be deleted; the Show will be deleted

immediately.

- If you press the

Stay

Stay button, before deleting a

Show, the Delete menu will not close automatically.

111111.6 Saving the Current Show on floppy disk

1.6 Saving the Current Show on floppy disk

All data necessary for the SHOW can be saved on to floppy disk (even all Fixtures to be used in the show and all

users with all settings for this show). Thus, you can transfer the whole show to another grandMA console or for

archive storage. The current Show will be saved including its name.

press

BACKUP

press

Floppy DISK

Format the floppy disk:

Summary of Contents for grandMA









































































































































































































































Search results

Summary of Contents for grandMA

Reviews:

Related manuals for grandMA

Brands by name

Popular brands

MA lighting grandMA, Operating Manual

Search results

Summary of Contents for grandMA

Reviews:

Related manuals for grandMA

Brands by name

Popular brands