MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
86
86
86
86
86
4.1.2
4.1.2
4.1.2
4.1.2
4.1.2 Store
Store
Store
Store
Store Options - Functions available when storing
Options - Functions available when storing
Options - Functions available when storing
Options - Functions available when storing
Options - Functions available when storing
The different settings in this menu have an effect on how Cues, but also Presets are stored. The settings modified
in this menu can be stored as defaults. These (Pre) sets will then be used for storing, but can also be adjusted from
case to case.
Press the STORE button and
hold
hold
hold
hold
hold
it. In the right TFT Display, the following selection will appear:
Press the buttons (selected button will be backlit in dark grey):
Store Source:
Store Source:
Store Source:
Store Source:
Store Source:
- Normal: Will store all values contained in the Programmer (mind the settings under STORE VALUES).
- Output: Will store all values output (as displayed in the DMX Sheet), i.e. also the position of the Master/
Groupmaster will be accounted for. Asssignments, e.g. to Presets, will be lost, as only the output value will be
stored, not the source.
- DMX IN (DMX Capture): With this setting, you can store DMX signals coming in via the DMX-IN jack, e.g. to store
a non-compatible Show of another console. You can also call up individual Cues on other consoles, if the SETUP
and the patched channels on the grandma are identical, and store a new Cue on the grandMA.
You can set the DMX-IN in the TOOL menu / DMX&NSP configuration / Local DMX Input. The incoming DMX has to
be merged with the DMX line, on which the fixtures of the imported Show were patched.
Filter:
Filter:
Filter:
Filter:
Filter:
- Define: Will open the Attribute filter; all attributes having a green background will be saved. The settings in this
filter will only be active for the following STORE process, afterwards, the filter will be reset to default again.
Store Values:
Store Values:
Store Values:
Store Values:
Store Values:
- Active Values:
Will store only the active values
only the active values
only the active values
only the active values
only the active values
(all values that have a
red background
red background
red background
red background
red background
in the FIXTURE
or CHANNEL window).
- All:
Will store all current settings
all current settings
all current settings
all current settings
all current settings
(all values of all Scanner and Dimmer channels).
Very memory-demanding – problems when saving presets – only recommendable for special cases.
- All for Selected Devices:
Will store all values of the selected Scanners and Dimmers
all values of the selected Scanners and Dimmers
all values of the selected Scanners and Dimmers
all values of the selected Scanners and Dimmers
all values of the selected Scanners and Dimmers
(the Scanners or
Dimmers are indicated by yellow names).
If not empty:
If not empty:
If not empty:
If not empty:
If not empty:
- Merge: When expanding Cues, all settings already stored will be kept. The newly set values will be stored to the
Cue as additions, already existing ones will be overwritten.
- Overwrite: Cue will be overwritten completely.
- Remove: When removing, only those parts of the Cue will be cut (deleted) out of the existing Cue that are active
(red).
- Ask to Confirm: nWhen storing a second Cue on an Executor, the SAVE window will open: Here, you can execute
one of the functions by selecting it.
Cue Options:
Cue Options:
Cue Options:
Cue Options:
Cue Options:
-
Cue Only On/Off: Settings to save: Cue Only On or Off
-
Reset Times On/Off: Preset, whether the set times are to be reset to default when saving CUEs the next time
(can be set in SETUP / DEFAULTS) (RESET TIMES ON) or whether they are to be kept (RESET TIMES O
.
Preset Options:
Preset Options:
Preset Options:
Preset Options:
Preset Options:
3.7 Creating and calling up Presets
3.7 Creating and calling up Presets
3.7 Creating and calling up Presets
3.7 Creating and calling up Presets
3.7 Creating and calling up Presets
Pressing the Save as default button will save the presets as defaults.
