Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
217
217
217
217
217
FAQ /
FAQ /
FAQ /
FAQ /
FAQ /
TROUBLE
TROUBLE
TROUBLE
TROUBLE
TROUBLE
SHOO
SHOO
SHOO
SHOO
SHOOTING
TING
TING
TING
TING
Question
Answer
The other console’s priority is higher than that
of the „founder“ console.
see chapter 14.1
When working with the 3D Visualizer, you
have to activate TOOLS / MA NETWORK
MULTIUSER on the console.
IP addresses do not correspond. The first three
groups of the IP have to be identical, e.g.
192.168.177.xxx, the figures of the forth
group (here xxx) have to differ for each device
connected.
The 3D version is not compatible to the
console software; the first three figures of the
version number have to correspond:4.36X
Some anti virus programs like e.g. NORTON
ANTIVIRUS, can disturb the interplay with the
3D - deactive these programs.
Hard disk failure or not present or cable
disconnected. Repairs should be performed by
a service technician, see hotline contact on
the bottom margin.
Flash corrupt, not present or bad contact.
Repairs should be performed by a service
technician, see hotline contact on the bottom
margin.
The patch number used for patching has to
correspond to the fixture address – if e.g. for a
moving head, the figures do not correspond or
Why will my console, on which I have created
a session, suddenly become SLAVE, after
inviting another console?
Why will the 3D not function?
Will only boot up to the message: COULD NOT
FIND ATA (blue scree)
Will boot up to the message:
(screen will remain black, will not become
blue)
„no system found“
Features are not assigned correctly; e.g. the
wheel changes the PAN setting,
or the fixture cannot be triggered.
