background image

Red = Charging
Green = Fully Charged

Charging Port

www.unilite.co.uk

CRI-H200R

FEATURES

•  High quality 200 Lumen white COB LED

•  Multi-coloured COB LED with high CRI of 96+

•  3 Colour temperatures: CCT - 2700k / 4500k / 6500k

•  Sensor mode for hands-free operation 

•  Fully adjustable non-slip silicone lined headband

•  Super tough construction - IK07 shock resistant

•  IP65 dust & water resistant

•  60° Rotational head

•  Red-to-Green charging indicator

•  Now USB-C rechargeable (1m cable included)

•  Faster 2 ½ hours charge time

BATTERY - 3.7v 1500mAh Li-polymer Rechargeable Battery 

WEIGHT - 110g 

DIMENSIONS - Headlight - H:48 x W:79 x D:46mm

OPERATION

Right Switch = COLOUR SELECTION - switch sequence: Warm White 

2700k > Daylight 4500k > Cool White 6500k > OFF 

MEMORY FUNCTION:- if left ON in any setting for longer than 8 seconds, 

the next press will turn OFF. Next press ON will return to the last colour 

setting used.

Left Switch = SENSOR MODE - press left switch to activate SENSOR 

mode, a red light will appear to indicate sensor is activated. Then wave 

your hand in front of the headlight to turn it ON or OFF (sensing distance 

approx 15cm). 

Press SENSOR switch again to deactivate SENSOR mode. 

CHARGING

1.  Only use a USB-C 5V cable (max 1A).

2.  Lift the charging port cover on the bottom of the headlight. 

3.  Plug the USB-C end of the cable into the charge port.

4.  Plug the USB end of the cable into a USB charging port (do not 

exceed 5V 1A charging input or damage may occur).

5.  Red LED indicates charging, green LED shows fully charged. 

6.  Charge Time: 2 ½ hrs

**Warranty void if not used with the specified chargers**

Detach headband 

from the end 

buckle

HEADBAND INSTALLATION

Feed the end buckle through these holes in the

 

back plate of the headtorch, then re-attach the

 

headband back onto the buckle.

ADVICE & IMPORTANT INFORMATION!

Do not look directly at the LED. Do not operate in direct sunlight or extreme temperature conditions (below 

-10⁰C or above 40⁰C). 

LEDs will become warm/hot when switched on; do not touch and never place LEDs face down on any surface 

– risk of fire! 

Do not use the device if there is any visible damage to the housing, charge port or cable. Take care when using 

a USB plug adaptor, check for any damage. DO NOT exceed 5V 1A output or damage may occur to the battery.

The rechargeable battery will reach full performance after a few complete charging and discharging cycles. 

To keep the rechargeable battery in optimum condition, it should be recharged every 3-6 months, especially 

if it is not being used for a long period of time. Always fully charge batteries before storage. 

Always protect batteries from heat, intense sunlight, fire, water and moisture – danger of explosion! 

If a battery is damaged, fluids can leak out. AVOID contact as this can lead to skin irritation and/or burns. If 

skin contact occurs, rinse thoroughly with water. If irritation persists, seek medical advice. Seek immediate 

medical assistance if lithium battery fluid comes into contact with the eyes.

Children under 12 years of age should only use the product under adult supervision.

Do not open, disassemble or attempt to modify the product; this will void the warranty and can be dangerous. 

Improper use or modification is not covered under the warranty.

Take care not to let the lens come into contact with hard/sharp objects, damage/scratches to lenses will 

affect light output. 

This product is water resistant to IPX5 – DO NOT SUBMERGE. If the product has been subjected to excessive 

moisture/water the warranty may be void. 

This product has a 1 year standard warranty (or extended to 2 years once registered online at WWW.UNILITE.

CO.UK) against manufacturing faults and defects. It does not cover normal wear and tear, modifications, 

accidental damage or poor maintenance. Unilite warranties do not cover battery leaks or the use of incorrect 

chargers and cables that can damage batteries. 

Do not dispose of this device in normal household waste. It must be disposed of via an authorised electrical 

appliance disposal centre or at your local waste disposal unit. 

Please re-use or recycle packaging where possible. 

Keep these instructions for future reference or for subsequent possessors.

HIGH

200

Lumens

27 M

3 H

ANSI FL 1 Standard

ON/OFF

switch

SENSOR

switch

Reviews: