background image

 Rev. 1/11

User Instructions

©Elation Pr

o

fessionals®  -  www.elationlighting.com  - TVL2000 Instruction Manual Page 2

  TVL2000         

                                         General Information

Unpacking: 

Thank you for purchasing the TVL2000 by Elation Pro-

fessionals

®

. Every TVL2000 has been thoroughly tested and has been 

shipped in perfect operating condition. Carefully check the shipping 
carton  for  damage  that  may  have  occurred  during  shipping.  If  the 
carton appears to be damaged, carefully inspect your fixture for any 
damage and be sure all equipment necessary to operate the unit has 
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Please do not return this unit to your dealer without con-
tacting customer support first. 

Introduction: 

The TVL2000 DMX intelligent LED fixture. The TVL2000 

has 3 DMX Modes; Two 2 Channel DMX Modes, and a 3 Channel Mode. 
The fixture two operating modes;  manual mode or DMX controlled. 
The TVL2000 can only be run as stand alone unit. 

For best results use 

fog or special effects smoke to enhance the light projections. 

Customer Support:

 Elation Professionals

®

 provides a toll free cus-

tomer support line, to provide help and to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may also visit us on the web at www.elationlighting.com for any com-
ments or suggestions. Service Hours are Monday through Friday 9:00 
a.m. to 5:00 p.m. Pacific Standard Time.
 

Voice:   

(323) 582-3322

 

Fax: 

  

(323) 832-9142

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.elationlighting.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

TVL2000

Summary of Contents for TVL2000 II











Reviews: