Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
107
107
107
107
107
overwrite all other dimmer channels of those Cues that were also called up in LTP mode. HTP Executors remain
unchanged.
Move in Black Options
Move in Black Options
Move in Black Options
Move in Black Options
Move in Black Options
MIB Always
MIB Always
MIB Always
MIB Always
MIB Always
key pressed: Cues in which fixture intensity changes from zero and also change other parameters
, for example, a different position, color or gobo, etc., will have these values “preset” so that live changes will not
be seen on stage. You can also set a FADE or DELAY time for these channels (
2.13
2.13
2.13
2.13
2.13
Settings in the Defaults Menu
/ Playback Timing).
MIB Never
MIB Never
MIB Never
MIB Never
MIB Never
key pressed: Cues which have separatly activated cues MIB fuctions are completely switched off (
4.3
4.3
4.3
4.3
4.3
Edit Sequences).
Auto PrePos
Auto PrePos
Auto PrePos
Auto PrePos
Auto PrePos
key pressed: The automatic prepositioning system will perform a move in black upon executor
start. Therefore all non-dimmer channels come up with zero fadetime and delay if the corresponding fixture was
dark when the executor was started. Switching off an executor with the Auto PrePos function enabled, tries not
to destroy the “stage look”, only dimmer channels are fading out.
When deactivating this sequence, the channels will be altered only after the respective dimmer has been set to
0.
LOOPS
LOOPS
LOOPS
LOOPS
LOOPS
NORMAL: use the GO command to execute the next Cue within the LOOP
breaking GO: use the GO command to cancel the LOOP and to execute the next Cue of the sequence
RESTART OPTIONS
RESTART OPTIONS
RESTART OPTIONS
RESTART OPTIONS
RESTART OPTIONS
If the “Restart with first cue” key is pressed, the Sequence will restart always with the
first
first
first
first
first
cue.
If the “Restart with actual cue” key is pressed, the Sequence will restart exactly where it was switched off the
last time.
If the “Restart with next cue” key is pressed, the Sequence will restart one cue after where it was switched off.
If the “Release from last to first cue” key is pressed, tracked values are released when the executor jumps back to
the first cue.
PRIORITY OPTIONS
PRIORITY OPTIONS
PRIORITY OPTIONS
PRIORITY OPTIONS
PRIORITY OPTIONS
There are 3 priorities: Low (lowest), Normal (middle) and High(highest). Executors having a higher priority, cannot
be overwritten by Executors of a lower priority. In general, this applies only for LTP functions.
PRIVATE EFFECTS: Effects saved in this sequence will only use channels that are not used by other sequences.
So, in some cases the effect may not be executed completely as no overlaps are allowed. (upper graphics)
GLOBAL EFFECTS: Effects saved in this sequence will use all channels, even if they overlap with other sequences.
(lower graphics)
For
LLLLLTP
TP
TP
TP
TP
Executors, you can choose
Off On Overwritten
Off On Overwritten
Off On Overwritten
Off On Overwritten
Off On Overwritten
additionally. When all functions of this Executor
have been overwritten by other Executors, this one will switch off.
Defaults Options
Defaults Options
Defaults Options
Defaults Options
Defaults Options
Pressing the SAVE AS DEFAULT key will save the current settings as default settings.
Pressing the LOAD FROM DEFAULT key will load the saved default settings and use them for this Executor.
PRIVATE EFFECTS
Eingebundener Effekt Andere laufende Sequenz
GLOBAL EFFECTS
Eingebundener Effekt
Andere laufende Sequenz
